Archive for the ‘World Eaters’ Category

Such a great model.  Major pain in the ass to assemble though.  I assembled mine with the landing gear up too.  When the landing gear is down, it sort of reminds me of a chicken flying.  You know, because they don’t actually fly, they have to leave their feet down?  Anyway, I much rather the look of it with the gear up.  Looks like a predator.  It does make it super hard to transport though.

Apologies about the picture too.  My light box that I photograph most of my models in, isn’t that great at larger models like this.  I think you get the gist though.  It’s pretty amazing on the board too.  It owns the sky, and can take a real beating and keep going.

I’ve since replaced the GW flying stand with a clear piece of rod.  I can’t stand the GW flying stand.  WTF were they thinking?!?!

StormEagle

My World Eaters force is really getting some colour to it now.  I’ve got Angron, Terminators, Spartan, Contemptor Dreadnought, the Storm Eagle, Rampagers and one more unit… to come in the next post…

Thanks for dropping in

John

World Eaters Ravagers

Posted: December 30, 2013 in World Eaters
Tags: , ,

This will be a very quick post.  Just more of a ‘look what I’ve finished painting’ sort of thing.

So this is a World Eater ‘Rampager’ Squad.  Basically these guys have all had the Butchers Nails implanted into their brain.  I’ve put them all in MkII armour.  Consistent with the World Eaters preference for this Mk of armour.  World Eaters Rampager
World Eaters Rampager Champion
World Eaters Rampager Legionaire 1
World Eaters Rampager LegionaireThats it for now, thanks for dropping in.

John

Ok, I know what you’re thinking…. ‘not another Angron’

I agree, this model has been really hammered since its release.  With good reason.  It’s AMAZING.  The amount of detail, the pose and the facial expression of this model are sublime.

I’ve actually just finished reading ‘Betrayer’ by the man, Aaron Dembski-Bowden.  If you haven’t checked it out, its well worth a look.  ADB’s books are always superb.  This book really goes into the personality of this Primarch, and its a lot more disturbed than I’d imagined.  This is one tortured soul, not only because of the nails, but also because of his enslavement and the deep wound left by the Emperor as a result of his ‘recuse’.  Towards the end of the book is a very interesting dialogue between Angron and the Primarch of the Ultramarines, Guilliman.  This dialogue provides a very telling insight into this Primarchs’ inner daemons, and why it was so easy for Lorgar to turn him.  Suffice to say, its a great book.

So the model… here are the pics.

OLYMPUS DIGITAL CAMERA
Angron back

Angron faceAs far as I’m concerned, Simon Egan is a genius.  He has given us so many magnificent models over the years, Inquisitor Hector Rex comes to mind, and more recent triumphs such as Angron and Ferrus Manus are to name but a few.

I have to say though, the face of Angron is simply amazing.  It’s very hard to paint because of how its positioned on the model, however it looks just like how I’d imagined him to look.  The only thing I wish I’d done differently now is painted his teeth silver.  Angron had his lips removed, his teeth replaced with ‘iron’ ones, face tattooed and Butchers Nails implanted into his brain by the Gladiator masters.

In game terms, this guy is a hardcore badass.  Basically unstoppable.  On the board he’s like a shark swimming through a school of bait fish.  Everything just tries to get away from him (often unsuccessfully)  You can actually take him in a 2000pt game.  On that scale of game, he really owns the table.

Ok, I hope you’ve enjoyed the pictures.

Until next time, thanks for dropping in.

John

Really happy with this model. I won’t bang on too much about it. I think its configuration is totally impractical in game terms, but damn it looks cool

World Eater Contemptor Dreadnought 1 World Eater Contemptor Dreadnought 2
World Eater Contemptor Dreadnought 3

Comments welcome as always, thanks for dropping in

John Sutton, Brisbane, Qld

 

I finished these a few days ago, however I’ve been pretty focused on painting these last few days and wanted to finished of another unit before I took some time out to photograph them both at the same time.  You’ll have to wait until the next post to see what else is finished, but for the time being here are the Terminators.

I’m particularly pleased with how these Terminators have turned out, I’m glad I took the time to modify Tyberous’s torso armour for each of the Terminators.  The ‘lightning bolt’ really fits in with the armies look and is very consistent with other World Eater models in the Forge World range.

The pictures

World Eaters Terminator Squad 1 World Eaters Terminator Squad 2 World Eaters Terminator Squad 3 World Eaters Terminator Squad 4 World Eaters Terminator Squad 5 World Eaters Terminator Squad 6 World Eaters Terminator Squad 7Thanks for dropping in

John

 

So… this has been a long time coming and now that I’m finished with it, I can say with certainty that it was worth the wait.  Its a great kit by Forge World.  I think I’ll just let the pictures do the talking on this one…World Eater Spartan Assault Tank 1 World Eater Spartan Assault Tank 2 World Eater Spartan Assault Tank 3 World Eater Spartan Assault Tank 4 World Eater Spartan Assault Tank 5 World Eater Spartan Assault Tank 6 World Eater Spartan Assault Tank 7These are the track links that I made for this kit as I wanted to add a little more detail to them than what comes stock.  If there is enough interest, I may actually produce them for sale similar to what I did with the Storm Shield.  Just a quick point about them, is that I’ve run very coarse sand paper over them to give them a used look, they are quite detailed if thats not your thing.  So flick me an email or leave a comment if its something you think you’d be interesting in seeing available for purchase.

If you look in the progress shot gallery you’ll se clearer images of what they look like fresh

Thanks for dropping in

John Sutton, Brisbane, Qld

Well, its been a long time coming but I finally got around to it.  I’ve started painting my 30k World Eaters army.  Bit late maybe, but who cares, they’re going to be bad ass.  I’ve actually been quite busy this last week or two with painting and modelling however I’ve been so focused on painting and modelling I’ve neglected to do any posts.  Plus the weather has been seriously crap here in Brisbane this last week so the light hasn’t been very conducive to taking good quality photos.  I did manage to get some pictures of my finished squad of 10 Blood Letters of Khorne and my Iron Hands Storm Eagle, however I had the wrong exposure setting on my camera and the pics turned out seriously crap.  So once the light improves here I’ll do up a post each for those two completed projects.

Anyway…  Back to the XII Legion.  So this is a pretty ambitious project for me, however instead of tackling it all in one hit, I’ve broken it down into smaller pieces to make it a bit more manageable.  I’ve actually gone and purchased over 5000pts worth of resin crack for the army, however I’m not going to attempt to paint them all at once…. I did think about it though… Plus, I’d like to enter Armies on Parade (September 28 in Australia) this year too and I figured having another Horus Heresy era army in the competition wouldn’t hurt…

Moving right along, the first lot of units on the painting table for the World Eaters are:

1.  Angron (of course),

2.  Terminator Squad,

3.  Rampager Squad,

4.  Legion Heavy Support Squad,

5.  Spartan Assault Tank (pimp mobile for the Terminators),

6.  Storm Eagle Gunship, and

7.  Contemptor Dreadnought

Heres what all that looks like in a box after I cut off all the tabs, pour point etc incase you’re wondering….

IMG_262401

So lets take a look at these units shall we…  By the way, the pics are pretty poor quality so please bear with me

Angron

Can I just say this model is amazing.  I know its been done to death on the interwebs but I just have to have a chop at it too (pardon the pun).  The detail is astonishing and Simon Egan well and truly exceeded everyones expectations with this model.  I won’t bang on too much about it but I’m seriously looking forward to painting this model.

IMG_265229

Terminator Squad

I knew very early on I wanted the squad sergeant to be based on the Tyberos model of Carcharodon fame.  This was for several reasons, the first is I really like the stance of this mini, and secondly, it has no Imperial Eagle on the breast plate.  As you may know, only the Emperors Children were allowed to have the Aquila on their breast plate, and the final reason is I like the studs on the armour and its baroque look, and well… its just a cool model and its character really suits that of the World Eaters.

This opened up an interesting can of worms for me as the terminator models I wanted to use for the actual squad are the Tartaros pattern terminator squad.  When I purchased these models, the Legion Tartaros pattern squad were not available so I had the armour I wanted, but the torsos were festooned with Aquila’s and the legs had no studs on them.  I also had a bunch of left over Tyberos models from when I did my Carcharodon army a year or two ago.  So I decided to go and make the torso from the Tyberos model the torso for the Tartaros squad. This required a fair bit of cutting, drilling and chopping but I got their in the end.  I also added studs to the legs and power fists of the models.  I’m pretty happy with the overall result.  Here are some pics, and also I’ll included a thumb nail gallery of the progress shots I take with my phone as I’m going along.  As I’ve mentioned previously I do these mostly for myself so I can remember how to I did something if I need to go back to it at some point in the future so they are not the most wonderfully framed shots.

I really like the squad sergeant (the whole squad will have the same should pads too)

 

IMG_265027

 

The squad preped and ready for undercoating

IMG_265128

Rampager Squad

These bad boys are the blood thirsty crazy psychopaths that have had the Butchers Nails implants. I guess they eventually went on to become Khorne Berzerkers… seems to fit.  I tried to have as many Chain Axe variants as I could for this squad and I made the squad leader out of an actual Rampager with a massive two handed Chain Axe.  I actually see these guys more as a Legion Tactical Squad that have just swapped their Bolters for Chain Weapons and Bolt pistols as opposed to a real Rampager squad, but for the sake of this post, lets just call them Rampagers.  I made sure they are all shod in MKII armour, which the XII Legion favoured.

IMG_266743

Legion Heavy support squad

The army needs someone to do the heavy lifting, so I thought some heavy weapons would be a good idea at this point.  So I threw in some plasma cannons.

IMG_266138

Spartan

This is one seriously bad ass tank.  If you haven’t read the Betrayal rule book yet, you may not know that in 30k these tanks were hard hitting, teeth pulling mo fo’s.  With a few upgrades they are practically indestructible, easily capable of delivering up to 12 Terminators to the enemies door step to wreak havoc whist along the way delivering hammer blows to the enemy.  So I decided to go balls out with this bad boy and stick practically every upgrade you can put on a Spartan on this model.  One in particular that I’ve wanted to do on a Landraider for some time is a dozer blade so this was a good opportunity to give it a shot.  This is perhaps what I am most proud of on this model, I hope it turns out ok once its all painted.  I intend on painting the interior of this model so the hull isn’t assembled yet. A few other obvious upgrades I’ve added to this model are a remote weapons platform for the multi melta and HK missile, frag assault launchers and track upgrades.  Behold

IMG_267550

The dozer bladeIMG_264926

Track upgrade

IMG_266642

Storm Eagle Gunship

Just cos they’re cool (that gap in the hulls been filled by the way)

IMG_267348

Assembling this kit is a real punish…

IMG_266844

Finally…  The Contemptor Dreadnought

So I’ve had this idea for a Contemptor for some time now that involves said Contempotor back handing a marine across the battlefield with a massive iron bar.  Yep, brutal.  It was sort of inspired by the cover of the Black Library Book Betrayer.  I wanted the base to tell a small story too…  So basically the dreadnought has been swatting marines with a random I beam that he’s found somewhere along the way.  A marine is behind some make-shift battlefield barricade frantically trying to hold off the assaulting force, and this dreadnought has just rocked up under fire and smacked this marine with massive I beam out from behind his cover.  You can see on the base spent bolter casings and an unloaded bolter on one of the drums.

IMG_265734

 

 

IMG_265633IMG_265936

Thats it for now.  Thanks for dropping in, hope you’ve gotten something from this post.  As usual, comments welcome.

Until next time

John